CAD-COMPACT Series - HIGH-EFFICIENCY HEAT RECOVERY UNITS

Specifications Operating range Nominal airflow of 460 to 2140 m³/h at 150 Pa static pressure Application Air renewal in commercial building, offices, hotels, public building and schools, where multiple rooms can benefit from a single HRV unit. With centralized control, these units efficiently manage air exchange across several spaces, reducing the need for individual installations. High efficiency Fans Plug fans with backward wheel blades. Single-phase EC motors with integrated electronic protection. IP44, Class B. Filtration - ISO ePM2.5 98.5% filters (F7 + F9) are used on the supply air side. - ISO ePM10 50% filter (M5) is used on the extract air side. Bypass 100% fresh air bypass integrated with manual and automatic control. The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable. Control An integrated function control, located inside the electrical box and wired to all the components (fans, bypass, filter clogging detectors, temperature probes, etc.). Includes control terminal for remote control which allows manual and automatic fan control. Other Single-phase electrical supply 230V 50-60Hz in models 500 to 2500. Accessories Filters accessories For optional filtration and replacement for CAD-COMPACT Series Filtration grade : F9, F7, M5, G4 filter Mounting accessories PRRE - Rectangular to circular adaptors SIL – Silencers ACOPEL F400 - Flexible connectors with clamps APC & APR - Protection guards for outdoor vent cover *Mounting accessories are supplied in unpainted galvanized sheet metal finish.* Weatherproof accessories Include with feet support and roof cover for outdoor installation such as roof top. ELECTRICAL ACCESSORIES SCO2-A 0/10V - Ambient CO2 and temperature sensor without display. Outlet: 0-10V. Power: 24 VDC. SCO2-G 0/10V - CO2 sensor for the duct. It controls the ventilation in sections of the extraction duct depending on the CO2concentration of the air circulating through it. Outlet: 0-10V. Power: 24 VDC. TDP-S probe – Air pressure probe For Constant pressure (COP) control mode. They are used to control the pressure in constant-pressure and continuous-flow ventilation systems. They allow the reading of pressure differentials at two points and convert it into an electrical signal suitable for the different type of control. TG-K NTC 4M - NTC temperature sensor Allows control of the delivery temperature. Range:0 °C 60 °C Construction Casing galvanized steel double-walled enclosure with internal thermo-acoustic fireproof insulation (A1/M0) made of 25 mm thick mineral wool. Heat exchanger Aluminium plate heat exchanger (up to 88%) certified by Eurovent.